Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Note how the cables leading into each of the hinges are routed, then release them from their guides. Whilst supporting the lid, remove 2 screws from each hinge. You will now be able to lift the lid assemble away from the body.
Removing the screen assembly
  • Note how the cables leading into each of the hinges are routed, then release them from their guides.

  • Whilst supporting the lid, remove 2 screws from each hinge. You will now be able to lift the lid assemble away from the body.

  • The hinge screws screw into brass bushes set in plastic pillars attached to the base of the laptop case. A common fault is that these pillars break away from the base leaving the hinge largely unsupported. Take care not to strain the other hinge whilst its screws are still in place.

  • Repair is difficult but a possible method might be to glue the pillars back in place with 2-part rapid epoxy glue with the hinge still attached, before removing the screws. Ensure it's supported and correctly positioned while the glue sets. Only then, remove the screws and build up more epoxy as reinforcement around the base of the pilars.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.