Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Screw the full syringe into the port on the caliper at the rear of the bike shown in the first photo. Screw an empty syringe into the port at the front at the brake lever shown on the second photo. Fully depress this syringe before attaching it to the hydraulic system.
  • Screw the full syringe into the port on the caliper at the rear of the bike shown in the first photo.

  • Screw an empty syringe into the port at the front at the brake lever shown on the second photo. Fully depress this syringe before attaching it to the hydraulic system.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.