Skip to main content
Inglese
Italiano

Traduzione in corso passo 1

Step 1
Locate the coolant reservoir, near the front of the engine bay. Do not remove the reservoir cap if the engine has overheated. Doing so may result in a steam explosion as pressure is released. Locate the coolant reservoir cap and remove it by pressing down and turning it counterclockwise.
  • Locate the coolant reservoir, near the front of the engine bay.

  • Do not remove the reservoir cap if the engine has overheated. Doing so may result in a steam explosion as pressure is released.

  • Locate the coolant reservoir cap and remove it by pressing down and turning it counterclockwise.

  • Never fill up the coolant while the engine is hot. This may cause the engine block to crack.

  • If the coolant level is low, fill up the reservoir using a 50/50 mixture of antifreeze and distilled water.

  • Many types of antifreeze coolant are pre-mixed, so read the instructions on the bottle before diluting with water.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.