Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Support the unit in one hand to remove tension from the wiring harness. Pinch the multi-wire connector and pull away from the unit to disconnect. Note the location and orientation of your RCA cables to aid in re-installation.  It is usually most useful to take a picture of the cables in place before removal.
  • Support the unit in one hand to remove tension from the wiring harness.

  • Pinch the multi-wire connector and pull away from the unit to disconnect.

  • Note the location and orientation of your RCA cables to aid in re-installation. It is usually most useful to take a picture of the cables in place before removal.

  • Remove the 4 RCA cords by simply pulling them out of each jack.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.