Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Note the locations of the wires and where they are attached.  If you happen to dislodge the wires during removal you will be able to re-attach them upon re-installation. Locate and remove the four anchoring 12mm long #2 Phillips screws for the head unit using the #2 screwdriver. It is now safe to pull out the head unit. Support it in one hand to reduce tension in the cables.
  • Note the locations of the wires and where they are attached. If you happen to dislodge the wires during removal you will be able to re-attach them upon re-installation.

  • Locate and remove the four anchoring 12mm long #2 Phillips screws for the head unit using the #2 screwdriver.

  • It is now safe to pull out the head unit. Support it in one hand to reduce tension in the cables.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.