Aggiusta le tue cose Community Store

iPad 3 Wi-Fi Akku Austausch

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida
Inglese
Tedesco
Passo successivo

Traduzione in corso passo 1

Passo 1
iPad 3 Wi-Fi Battery Replacement: passo 0, immagine 1 di 1

  • The battery in the third generation iPad is very firmly glued to the aluminum frame using copious amounts of strong adhesive.

  • In the following steps, you will be removing the adhesive from underneath the battery 2 inches at a time. This will prevent too much stress being put on the battery.

  • Be very careful to not puncture or damage the battery as you remove it from the iPad. Batteries contain toxic chemicals that can be harmful if ingested or inhaled.

Der Akku im iPad der dritten Generation ist mit großen Mengen Klebestoffs sehr fest am Aluminiumrahmen festgeklebt.

In den nachfolgenden Schritten wirst du die Klebeverbindung jeweils in 5 cm Schritten lösen. Dadurch wird vermieden, dass der Akku zu stark belastet wird.

Sei sehr vorsichtig und beschädige den Akku nicht beim Ausbau. Akkus enthalten giftige Substanzen, die nicht eingenommen oder eingeatmet werden dürfen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.