Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 9

Passo 9
Remove the earpiece speaker and front sensor assembly. During reassembly, check the position of the black plastic module containing these components: Proximity sensor
Remove the speaker + front sensors
  • Remove the earpiece speaker and front sensor assembly.

  • During reassembly, check the position of the black plastic module containing these components:

  • Proximity sensor

  • Flood illuminator

  • The module must be positioned so that these components are not obstructed by any adhesive.

Remueve el altavoz auricular y ensamblaje de sensor frontal.

Durante el reensamblaje, verifica la posición del módulo de plástico negro que contiene estos componentes:

Sensor de proximidad

Iluminador de inundación

El módulo debe colocarse de manera que estos componentes no queden obstruidos por ningún adhesivo.

[title] Remove the speaker + front sensors
[* black] Remove the earpiece speaker and front sensor assembly.
[* icon_reminder] During reassembly, check the position of the black plastic module containing these components:
[* red] Proximity sensor
[* orange] Flood illuminator
[* yellow] The module must be positioned so that these components are not obstructed by any adhesive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.