Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 7le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 6

Passo 6
Remove the five screws securing the logic board connector bracket to the rear case: Three 1.2 mm Y000 screws
Unscrew the logic board connector cover
  • Remove the five screws securing the logic board connector bracket to the rear case:

  • Three 1.2 mm Y000 screws

  • One 1.5 mm Phillips screw

  • One 1.3 mm Phillips screw

  • Remove the bracket.

  • Be careful not to lose the smaller bracket clipped onto the edge. It's secured with a small clip and is easy to accidentally knock off of the larger bracket.

Remueve los cinco tornillos que sujetan el soporte del conector de la placa lógica a la caja trasera:

Tres tornillos Y000 de 1.2 mm

Un tornillo Phillips de 1.5 mm

Un tornillo Phillips de 1.3 mm

Ten cuidado de no perder el pequeño soporte que está enganchado al soporte de conector. Esta sujeto con un pequeño clip y es muy fácil de sacarlo del soporte más grande accidentalmente.

[title] Unscrew the logic board connector cover
[* black] Remove the five screws securing the logic board connector bracket to the rear case:
[* red] Three 1.2 mm Y000 screws
[* orange] One 1.5 mm Phillips screw
[* yellow] One 1.3 mm Phillips screw
[* black] Remove the bracket.
[*
icon_note] Be careful not to lose the [https://d3nevzfk7ii3be.cloudfront.net/igi/BLoNCtTggDqOfLxl|smallhttps://d3nevzfk7ii3be.cloudfront.net/igi/BLoNCtTggDqOfLxl|smaller bracket|new_window=true] that's clipped onto the connector bracketedge. It's held onsecured with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XcoV2gOk5ISoxJLN|small clip|new_window=true] and is easy to accidentally knock off of the larger bracket.
[* black] Remove the bracket.
[*
icon_note] Be careful not to lose the [https://d3nevzfk7ii3be.cloudfront.net/igi/BLoNCtTggDqOfLxl|smallhttps://d3nevzfk7ii3be.cloudfront.net/igi/BLoNCtTggDqOfLxl|smaller bracket|new_window=true] that's clipped onto the connector bracketedge. It's held onsecured with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XcoV2gOk5ISoxJLN|small clip|new_window=true] and is easy to accidentally knock off of the larger bracket.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.