Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 10

Passo 10
Open the iPhone by swinging the display up from the left side, like the back cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board. Lean the display against something to keep it propped up while you're working on the phone.
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Abre el iPhone moviendo la pantalla hacia arriba desde el lado izquierdo, como la contraportada de un libro.

No intentes separar completamente la pantalla todavía, ya que varios cables planos frágiles aún la conectan a la placa lógica del iPhone.

Apoya la pantalla contra algo para mantenerla apoyada mientras trabajas en el teléfono.

Durante el re-ensamblaje, coloca la pantalla en posición, alinea los clips a lo largo del borde superior y presiona con cuidado el borde superior hasta que encaje el resto de la pantalla hacia abajo. Si no encaja fácilmente en su lugar, verifica la condición de los clips alrededor del perímetro de la pantalla y asegúrate de que no estén doblados.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.