Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 8

Passo 8
The top edge of the display is secured with both glue and clips. Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port. The clips will break if you use too much force. Work carefully and be patient.
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏的上边缘由胶水与卡扣一同固定。

在显示屏的上角划动塑料拨片,并轻轻地向朝闪电接口方向拉动或者滑动显示屏。

若用力过猛可能会损坏卡扣,请小心操作。

再次重申,不要将塑料拨片插入过深——仅需要插入距离显示面板边缘几毫米即可——否则您可能会损坏前面板传感器阵列。

划动塑料拨片至另一边角以划开剩下的固定胶。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.