Salta al contenuto principale

2018年末 Mac mini 风扇更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
Mac mini Late 2018 Fan Replacement: passo 0, immagine 1 di 2 Mac mini Late 2018 Fan Replacement: passo 0, immagine 2 di 2
  • Use a T6 Torx driver to remove the four 7.2 mm screws securing the fan:

  • Two screws securing the fan to the logic board

  • Two screws with rubber shoulders securing the fan to the exhaust vent

  • Rubber grommets secure these screws to the fan, so they may not come out completely. Just make sure they are fully loosened.

使用一个T6 Torx螺丝刀来移除四颗固定风扇的7.2毫米螺丝:

两颗螺丝将风扇固定在逻辑板上

两颗螺丝将风扇固定在散热孔上

橡胶垫圈将这些螺丝固定在风扇上,会导致它们不能完全移除。一定要确保彻底松开。

[* black] Use a T6 Torx driver to remove the four 7.2 mm screws securing the fan:
[* red] Two screws securing the fan to the logic board
- [* orange] Two screws securing the fan to the exhaust vent
+ [* orange] Two screws with rubber shoulders securing the fan to the exhaust vent
[* icon_note] Rubber grommets secure these screws to the fan, so they may not come out completely. Just make sure they are fully loosened.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.