Salta al contenuto principale

Mac mini Late 2018 アンテナプレートの換装

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Mac mini Late 2018 Antenna Plate Replacement: passo 0, immagine 1 di 1
  • Remove six TR6 Torx security screws securing the antenna plate, of the following lengths:

  • Three 4.1 mm shoulder screws

  • Three 1.8 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your Mac.

アンテナプレートを固定している次の長さのTR6トルクスセキュリティネジを、計6本取り外します。

3つの4.1 mm肩ツキネジ

3つの1.8mmネジ

この修理の間、各ネジを保管し、作業後はMacの損傷を避けるために、各ネジを正しい位置に装着しているか確認してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.