Aggiusta le tue cose Community Store

Reemplazo de la placa de antena en la Mac mini de finales de 2018

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Spagnolo
Passo successivo

Traduzione in corso passo 1

Passo 1
Mac mini Late 2018 Antenna Plate Replacement: passo 0, immagine 1 di 1

  • Remove six TR6 Torx security screws securing the antenna plate, of the following lengths:

  • Three 4.1 mm shoulder screws

  • Three 1.8 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your Mac.

Retira los seis tornillos de seguridad T6 Torx que sujetan la placa de la antena y que tienen las siguientes longitudes:

Tres tornillos de 4.1 mm

Tres tornillos de 1.8 mm

Durante toda esta reparación, controla cada tornillo y asegúrate de que vuelva exactamente de donde salió para evitar dañar tu Mac.

-[* black] Remove six T6 Torx security screws securing the antenna plate, of the following lengths:
- [* red] Three 4.1 mm screws
+[* black] Remove six TR6 Torx security screws securing the antenna plate, of the following lengths:
+ [* red] Three 4.1 mm shoulder screws
[* orange] Three 1.8 mm screws
[* icon_reminder] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your Mac.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.