Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.
  • Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case.

  • Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.