Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Remove all Phillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.
  • Remove all Phillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case.

  • Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.