Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Once the screws are removed, use a spudger and guitar picks to unclip the bezel. We have now unscrewed the second layer and we have got to the bottom of it. We were planning to remove the micro USB socket as the tablet had stopped charging and replace it or solder the dry joints caused by the constant flexing of the plug in the socket.
sort of disassemble entirely
  • Once the screws are removed, use a spudger and guitar picks to unclip the bezel. We have now unscrewed the second layer and we have got to the bottom of it.

  • We were planning to remove the micro USB socket as the tablet had stopped charging and replace it or solder the dry joints caused by the constant flexing of the plug in the socket.

  • To do this we would need to unglue the battery and the flexi rigid circuit board underneath and replace them as it is unlikely that the removal could be achieved without damage. We did not have spare parts so decided that the best option was to reassemble for the present and try to obtain spare parts.

  • The reassembly is a reverse of the operation. Don't forget to remove the sim card before reassembly and make sure that the buttons are properly seated before snapping the first layer on.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.