Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use a PH1 screwdriver to unscrew the two 9.0 mm screws on the circuit board that corresponds to the red power button. Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack. A spring may pop out.
  • Use a PH1 screwdriver to unscrew the two 9.0 mm screws on the circuit board that corresponds to the red power button.

  • Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack.

  • A spring may pop out.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.