Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Carefully lift up the MLB board. Underneath it is another ZIF connector. Use a spudger to flip the small flap on the ZIF connector.
  • Carefully lift up the MLB board. Underneath it is another ZIF connector. Use a spudger to flip the small flap on the ZIF connector.

  • This will take a few tries to get it done correctly. Remember to not use too much force as you do not want to damage the ZIF connector.

  • Remove the MLB Board by flipping the device over and letting it fall into your hands.

  • Completely remove the ribbon cable from the case, reattach it to the MLB board, then place the board and ribbon cable back into its original position.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.