Menü

Le tue impostazioni

Torna alla Guida
Inglese
Italiano
Passaggio precedente Passo successivo

Traduzione in corso passo 2

Passo 2
Gently insert the metal spudger between the lens and the lens casing. Rotate the spudger around the exterior of the lens and lens housing, separating them. The lens is held in place with an adhesive that will have to be applied during reassembly.

  • Gently insert the metal spudger between the lens and the lens casing.

  • Rotate the spudger around the exterior of the lens and lens housing, separating them.

  • The lens is held in place with an adhesive that will have to be applied during reassembly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.