Aggiusta le tue cose Community Store

JBL Flip 4 USB-poort vervangen

Passo precedente Passo successivo

Traduzione in corso passo 4

Torna alla Guida
Inglese
Olandese
Passo 4
JBL Flip 4 USB Port Replacement: passo 0, immagine 1 di 3 JBL Flip 4 USB Port Replacement: passo 0, immagine 2 di 3 JBL Flip 4 USB Port Replacement: passo 0, immagine 3 di 3

  • Unhook the white plug attached to the small circuit board hanging from the gray micro USB casing using the ESD Safe Blunt Nose Tweezers.

  • Move the plug out of the way by pulling it through the gap in the large circuit board to get to the next plug behind it.

Haak de witte stekker los die is bevestigd aan de kleine printplaat die aan de grijze micro-USB-behuizing hangt met behulp van de ESD-veilige stompe neuspincet.

Schuif de stekker uit de weg door hem door de opening in de grote printplaat te trekken om bij de volgende stekker erachter te komen.

-[* red] Unhook the white plug attached to the small circuit board hanging from the gray micro USB casing using the ESD Safe Blunt Nose Tweezers.
+[* red] Unhook the white plug attached to the small circuit board hanging from the gray micro USB casing using the ESD Safe [product|IF145-020-4|Blunt Nose Tweezers].
[* black] Move the plug out of the way by pulling it through the gap in the large circuit board to get to the next plug behind it.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.