Salta al contenuto principale

Sostituzione display Samsung Galaxy A3 (2017)

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Samsung Galaxy A3 (2017) Display Replacement: passo 0, immagine 1 di 1
  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

Prepara un iOpener e applicalo sul display per almeno due minuti per ammorbidire l'adesivo sottostante.

Può rivelarsi necessario scaldare e applicare l'iOpener per diverse volte consecutive per poter scaldare abbastanza il telefono. Segui le istruzioni per l'iOpener per evitare il surriscaldamento.

Se il vetro del tuo display è crepato, evita ulteriori rotture e previeni infortuni nel corso della riparazione applicando del nastro adesivo sul vetro.

Disponi strisce sovrapposte di nastro da pacchi trasparente sul display fino a ricoprire l'intera superficie.

In questo modo, eviterai la dispersione di schegge di vetro assicurando al tempo stesso l'integrità strutturale del vetro quando dovrai forzare il distacco del display.

Indossa occhiali di sicurezza per proteggere gli occhi da schegge di vetro che potrebbero volare via durante la riparazione.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.