Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 4guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Use an opening pick to cut the adhesive on all sides of the phone. Leave one opening pick in every corner to prevent the adhesive from resealing. Reuse an iOpener if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough. Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. Flip it sideways until you can get a good grip on the back cover.
  • Use an opening pick to cut the adhesive on all sides of the phone. Leave one opening pick in every corner to prevent the adhesive from resealing.

  • Reuse an iOpener if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough.

  • Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. Flip it sideways until you can get a good grip on the back cover.

Usa un plettro di apertura per tagliare l'adesivo su tutti i lati del telefono. Lascia un plettro in ogni angolo per impedire che l'adesivo si riattacchi.

Usa di nuovo un iOpener se l'adesivo diventa duro da tagliare. Nell'intero corso del processo di rimozione, la cover posteriore resta in tensione e quindi potrebbe rompersi se l'adesivo non si è indebolito a sufficienza.

Inserisci un plettro di apertura sul lato destro del telefono dopo aver tagliato l'adesivo lungo tutti i lati. Inclina l'attrezzo da una parte finché non riesci ad avere una buona presa sulla cover posteriore.

[* black] Use an opening pick to cut the adhesive on all sides of the phone. Leave one opening pick in every corner to prevent the adhesive from resealing.
[* icon_caution] [guide|25705|Reuse an iOpener|new_window=true] if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough.
[* black] Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. FipFlip it sideways until you can get a good grip on the back cover.
[* black] Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. FipFlip it sideways until you can get a good grip on the back cover.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.