Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around. Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.
  • If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.

  • Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.

Usa la punta di uno spudger per sollevare e disconnettere il cavo dell'antenna dalla parte superiore della scheda logica.

[* icon_note] If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.
[* black] Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.