Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 7guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use the flat end of a spudger to disconnect the front camera flex cable. If you want to go on and remove the motherboard assembly, there is no need to remove the front facing  camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.
  • Use the flat end of a spudger to disconnect the front camera flex cable.

  • If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.

  • Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

Usa l'estremità piatta di uno spudger per scollegare il cavo flessibile della fotocamera frontale.

Se vuoi proseguire con la rimozione del gruppo della scheda madre, non c'è bisogno di rimuovere la fotocamera frontale dopo averla disconnessa. Ma se non ti senti sicuro, rimuovila con attenzione usando delle pinzette.

Usa delle pinzette per rimuovere con delicatezza la fotocamera frontale.

[* black] Use the flat end of a spudger to disconnect the front camera flex cable.
[* icon_note] If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.
[* black] Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).
[* black] Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.