Salta al contenuto principale
Inglese
Cinese

Traduzione in corso passo 4

Passo 4
Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.
  • Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.

  • Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.

用一根撬棒缓缓将电池的接头撬离主板以保证拆解过程中没有带电。

震动马达的插头与电池的插头离得很近,拆解时请务必小心。如果你是在替换右侧Joy-Con,你也需要注意天线的插头。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.