Salta al contenuto principale
Inglese
Olandese

Traduzione in corso passo 4

Passo 4
Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.
  • Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.

  • Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.

Gebruik een spudger om de batterijaansluiting voorzichtig uit het contact op het moederbord omhoog te duwen. Dit zal ervoor zorgen dat de Joy-Con niet aan kan gaan tijdens de reparatie.

Wees voorzichtig bij het werken in de buurt van de trilmotorkabel, die dicht langs de batterijaansluiting loopt. Bij het vervangen van de batterij in de rechter Joy-Con, zul je ook om een antennekabel heen moeten werken tijdens deze stap.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.