Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step. Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.
  • Use a Spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.

  • Use caution while working around the vibration motor cable that runs close to the battery connector. If you are replacing the battery in a right Joy-Con, you will also need to work around an antenna cable during this step.

Usa uno spudger per far leva delicatamente sul connettore della batteria dalla scheda madre e staccarlo. Questo eviterà che il Joy-Con si possa accendere durante la riparazione.

Fai attenzione durante questo passaggio ai cavi del motore della vibrazione che corrono vicino al connettore della batteria. Se stai sostituendo la batteria in un controller destro, dovrai anche fare attenzione a un cavo di antenna durante questo passo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.