Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 8

Passo 8
Use a spudger or fingernail to pry the digitizer cable connector up from its socket. If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
  • Use a spudger or fingernail to pry the digitizer cable connector up from its socket.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

使用spudger或指甲將數字轉換器電纜連接器從插槽中向上撬起。

如果在維修後屏幕的任何部分沒有響應觸摸,請斷開電池,然後重新安裝此連接器,確保其完全卡入到位並且插座中沒有灰塵或其他障礙物。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.