Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 8

Passo 8
Use a spudger or fingernail to pry the digitizer cable connector up from its socket. If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
  • Use a spudger or fingernail to pry the digitizer cable connector up from its socket.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

Soulevez le connecteur de la nappe de la vitre tactile à l'aide d'une spatule ou de votre ongle.

Si une partie de votre écran ne réagit pas au toucher après votre réparation, déconnectez la batterie puis rebranchez ce connecteur en veillant à ce qu'il s'enclenche entièrement et que ni poussières ni d'autres corps étrangers ne bouchent dans la prise.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.