Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Use a spudger or a fingernail to disconnect the OLED panel cable connector. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
  • Use a spudger or a fingernail to disconnect the OLED panel cable connector.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

スパッジャーもしくは指先の爪を使って、OLEDパネルケーブルのコネクターの接続を外します。

このようにコネクターを再装着するには、コネクターの位置を揃えて一方の端を押し込み、装着してから反対側端を押し込みます。中央部分を押さえないでください。コネクタの位置が揃っていなければ、ピンが曲ってしまい、永久的なダメージに繋がります。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.