Aggiusta la tua roba

Diritto alla Riparazione

Store

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 11guide che includono questo passo.

Torna alla Guida
Inglese
Italiano
Passaggio precedente

Traduzione in corso passo 3

Passo 3
Use a spudger or your fingers to lift the heatsink up and off the motherboard to remove it. You may feel a bit of resistance. This is normal, since the heat sink is slightly bonded to the CPU with thermal paste. Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. Apply new thermal paste to the CPU before reassembly.

  • Use a spudger or your fingers to lift the heatsink up and off the motherboard to remove it.

  • You may feel a bit of resistance. This is normal, since the heat sink is slightly bonded to the CPU with thermal paste.

  • Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. Apply new thermal paste to the CPU before reassembly.

Tira il dissipatore verso l'alto di 45 gradi e ruotalo verso destra per rimuoverlo.

[* black] PullUse a spudger or your fingers to lift the heatsink up 45 degrees and rotate itoff the motherboard to remove it.
[* icon_note] You may feel a bit of resistance. This is normal, since the rightheat sink is slightly bonded to removethe CPU with thermal paste.
[* icon_reminder] Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. [guide|744|Apply new thermal paste|new_window=true] to the CPU before reassembly.
[* black] PullUse a spudger or your fingers to lift the heatsink up 45 degrees and rotate itoff the motherboard to remove it.
[* icon_note] You may feel a bit of resistance. This is normal, since the rightheat sink is slightly bonded to removethe CPU with thermal paste.
[* icon_reminder] Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. [guide|744|Apply new thermal paste|new_window=true] to the CPU before reassembly.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.