Salta al contenuto principale
Inglese
Olandese

Traduzione in corso passo 4

Passo 4
Use a spudger to gently pry the battery connector straight up from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair. Be very careful as you pry up the connector—if it doesn't come up with the spudger, try gently pulling the cables straight up from the board to disconnect it.
  • Use a spudger to gently pry the battery connector straight up from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.

  • Be very careful as you pry up the connector—if it doesn't come up with the spudger, try gently pulling the cables straight up from the board to disconnect it.

  • During reassembly, press the connector straight down into its socket on the board to reconnect the battery.

Gebruik een spudger om de batterijaansluiting voorzichtig uit het contact op het moederbord omhoog te duwen. Dit voorkomt dat de Joy-Con tijdens de reparatie aan zal gaan.

Wees voorzichtig met het werken in de buurt van de trilmotorkabel, die erg dicht langs de batterijaansluiting loopt.

Druk de aansluiting, tijdens het weer in elkaar zetten van je toestel, recht omlaag in het contact op het bord om de batterij opnieuw aan te sluiten.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.