Salta al contenuto principale
Inglese
Cinese

Traduzione in corso passo 2

Passo 2
Insert an opening pick into the seam at the bottom edge of the controller (opposite the L and ZL buttons). Slowly slide the flat edge of your opening pick up the side of the Joy-Con. Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
  • Insert an opening pick into the seam at the bottom edge of the controller (opposite the L and ZL buttons).

  • Slowly slide the flat edge of your opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.

将开口器插入控制器底部边缘的缝隙处(与L和ZL按钮相对)。

慢慢地将Opening Pick(开口器)的平边滑动到Joy-Con的侧面。

小心不要将开口器滑到Joy-Con的深处。 这可能会损坏内部组件。 后面板相当容易松动,因此不需要太大的力气。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.