Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Use a pair of tweezers to place the metal plate covering the battery connector back in its original position. Install the Tri-point #000 screw.
  • Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.

  • Install the Tri-point #000 screw.

  • At this point you might want to turn on the watch and check if everything is working, before sealing it shut.

Usa delle pinzette per rimettere nella sua posizione originale la piastra metallica che copre il connettore della batteria.

Rimetti al suo posto la vite tri-wing #000.

[* black] Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.
[* black] Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.
[* red] Install the Tri-point #000 screw.
[* icon_reminder] At this point you might want to turn on the watch and check if everything is working, before sealing it shut.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.