Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Using a plastic spudger or prying tool, carefully lift the snap connectors attached to the Motherboard. Lift the black antenna cable out from next to the vibrator motor so that it is loose from the frame. Using a spudger, carefully lift the black lever of the zif connector (indicated by the arrow), then using tweezers,  carefully pull the flex cable out of the connector.
  • Using a plastic spudger or prying tool, carefully lift the snap connectors attached to the Motherboard.

  • Lift the black antenna cable out from next to the vibrator motor so that it is loose from the frame.

  • Using a spudger, carefully lift the black lever of the zif connector (indicated by the arrow), then using tweezers, carefully pull the flex cable out of the connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.