Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver.  Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.
  • While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.

  • Repeat steps 1 - 6 to install the second truck.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.