Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 3

Passo 3
Use the flat end of the spudger to pry up the top left corner of the battery where the flex cable is located. Slide the spudger along the side of the battery to break apart remaining adhesive. When prying keep to the areas marked orange. Avoid the red area in the middle which is the back of the display.
  • Use the flat end of the spudger to pry up the top left corner of the battery where the flex cable is located.

  • Slide the spudger along the side of the battery to break apart remaining adhesive.

  • When prying keep to the areas marked orange. Avoid the red area in the middle which is the back of the display.

Gebruik het platte eind van een spudger om de linker bovenhoek van de batterij, waar de flexkabel zich bevindt, omhoog te wrikken.

Schuif je spudger langs de zijkant van de batterij om onderweg alle lijm door te snijden.

Blijf tijdens het omhoog wrikken van de batterij wrikken op de plekken die oranje gekleurd zijn. Vermijd de rode gebieden in het midden, aangezien dit de achterkant van het scherm is.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.