Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Use the flat end of the spudger to pry up the top left corner of the battery where the flex cable is located. Slide the spudger along the side of the battery to break apart remaining adhesive. When prying keep to the areas marked orange. Avoid the red area in the middle which is the back of the display.
  • Use the flat end of the spudger to pry up the top left corner of the battery where the flex cable is located.

  • Slide the spudger along the side of the battery to break apart remaining adhesive.

  • When prying keep to the areas marked orange. Avoid the red area in the middle which is the back of the display.

Benutze das flache Ende des Spudgers, um die linke obere Ecke des Akkus hochzuhebeln, wo sich das Flachbandkabel befindet.

Schiebe den Spudger an der Seite des Akkus entlang, um alle Klebereste zu lösen.

Bleibe beim Hebeln in den orange markierten Bereichen. Vermeide den rot markierten Bereich in der Mitte, das ist die Rückseite des Displays.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.