Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 1

Passo 1
Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath the battery. Reheat and reapply the iOpener as needed.
  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath the battery. Reheat and reapply the iOpener as needed.

  • Alternatively or when the battery is blown up, you can apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

Verwarm een iOpener en leg deze op het scherm gedurende minstens twee minuten om de lijm onder de batterij te verzachten. Verwarm en leg de iOpener opnieuw op de telefoon indien nodig.

Als alternatieve methode, of wanneer de batterij is opgeblazen, kun je isopropyl alcohol toedienen onder ieder hoek van de batterij. Laat de vloeistof en aantal minuten intrekken om de lijm te verzwakken.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.