Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath the battery. Reheat and reapply the iOpener as needed.
  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath the battery. Reheat and reapply the iOpener as needed.

  • Alternatively or when the battery is blown up, you can apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

Bereite einen iOpener vor und lege ihn mindestens zwei Minuten lang auf das Display, um den Kleber unter dem Akku aufzuweichen. Erhitze den iOpener nach Bedarf erneut und lege ihn wieder auf.

Alternativ, oder auch wenn der Akku aufgebläht ist, kannst du unter jede Ecke des Akkus etwas Isopropylalkohol träufeln und ein paar Minuten einwirken lassen, um den Kleber aufzuweichen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.