Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 1

Passo 1
Insert a fingernail or a spudger into the notch on the bottom edge of the phone, near the charge port. Gently twist or pry to open a small gap between the back cover and the body of the phone. While keeping your tool (or fingernail) inserted into the gap between the back cover and the body of the phone, slide it around the corner to begin loosening the plastic clips holding the cover in place.
  • Insert a fingernail or a spudger into the notch on the bottom edge of the phone, near the charge port.

  • Gently twist or pry to open a small gap between the back cover and the body of the phone.

  • While keeping your tool (or fingernail) inserted into the gap between the back cover and the body of the phone, slide it around the corner to begin loosening the plastic clips holding the cover in place.

Steek een nagel of een spudger in de inkeping aan de onderkant van de telefoon, dichtbij de oplaadpoort.

Kantel of wrik je tool op voorzichtige wijze om zo een kleine opening tussen de achterste behuizing en de body van de telefoon te creëren.

Schuif je tool, als deze eenmaal in de opening tussen de achterste behuizing en de body van de telefoon zit, om de hoek heen om de behuizing los te maken uit de plastic klemmen die het aan de telefoon bevestigen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.