Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Insert a fingernail or a spudger into the notch on the bottom edge of the phone, near the charge port. Gently twist or pry to open a small gap between the back cover and the body of the phone. While keeping your tool (or fingernail) inserted into the gap between the back cover and the body of the phone, slide it around the corner to begin loosening the plastic clips holding the cover in place.
  • Insert a fingernail or a spudger into the notch on the bottom edge of the phone, near the charge port.

  • Gently twist or pry to open a small gap between the back cover and the body of the phone.

  • While keeping your tool (or fingernail) inserted into the gap between the back cover and the body of the phone, slide it around the corner to begin loosening the plastic clips holding the cover in place.

指先もしくはスパッジャーを使って、充電ポート付近のデバイス下側エッジ上の溝に差し込みます。

ゆっくりと、バックカバーとデバイス本体の間にある小さな隙間を捻りながら広げます。

ツール (もしくは指先)をバックカバーと本体の間の隙間に差し込んだまま、コーナー周辺をスライドして、カバーを固定しているクリップを緩めます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.