Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Reinstall the two screws that hold the hop-up unit in place. Reinstall the plastic receiver cover, making sure that the notches are lined up and that the metal rod is aligned with the small spring at the front of the receiver. Reinstall the small screw that holds the cover in place.
  • Reinstall the two screws that hold the hop-up unit in place.

  • Reinstall the plastic receiver cover, making sure that the notches are lined up and that the metal rod is aligned with the small spring at the front of the receiver.

  • Reinstall the small screw that holds the cover in place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.