Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Slide the gearbox back into the receiver, starting with the rear wiring. After the wiring is in the stock, slide the motor cage through the grip opening. Seat the gearbox in the receiver. Reinstall the selector plate and gently tighten the screw.
  • Slide the gearbox back into the receiver, starting with the rear wiring. After the wiring is in the stock, slide the motor cage through the grip opening.

  • Seat the gearbox in the receiver.

  • Reinstall the selector plate and gently tighten the screw.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.