Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Unplug the remaining ribbon cables
  • Unplug the remaining ribbon cables

  • Remove the last three Philipps #0 screws securing the Motherbard.

  • Now you should be able to replace most components.

  • The screen is held in place from the front by adhesive (or not, in the earlier versions), its cable slides trough the phone to the PCB - It's the large connector in the middle.

  • The battery is glued to the frame firmly. There are three pultabs located underneath the motherboard.

  • Don't forget to remove the sim-try if you're removing the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.