Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 3

Passo 3
Gently slide an opening pick between the antenna flex cable and the top of the speaker. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.
  • Gently slide an opening pick between the antenna flex cable and the top of the speaker.

  • This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.

Schuif je openingsplectrum op voorzichtige wijze tussen de flexkabel van de antenne en de bovenkant van de speaker.

Dit deel van de flexkabel is lichtjes vastgelijmd. Gebruik, indien nodig, wat warmte van een iOpener of een föhn om de lijm te verzachten. Dit zorgt ervoor dat het makkelijker is om de flexkabel op een veilige manier los te maken (en te herbevestigen).

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.