Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Gently slide an opening pick between the antenna flex cable and the top of the speaker. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.
  • Gently slide an opening pick between the antenna flex cable and the top of the speaker.

  • This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.

アンテナのフレックスケーブルからスピーカー上部まで開口ピックを静かにスライドさせます。

フレックスケーブルは所定の位置に軽く接着されています。もし必要であれば、iOpenerやヘアドライヤーで軽く熱を加えて接着剤を柔らかくしてください。これにより、フレックスケーブルを安全にかつ簡単に取り外すことができます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.