Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
Gently slide an opening pick between the antenna flex cable and the top of the speaker. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.
  • Gently slide an opening pick between the antenna flex cable and the top of the speaker.

  • This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.

Faites délicatement glisser un médiator entre la nappe de l'antenne et la partie supérieure du haut-parleur.

Cette partie de la nappe adhère légèrement. Si nécessaire, chauffez un peu à l'aide d'un iOpener ou d'un sèche-cheveux pour ramollir l'adhésif. Ceci permettra de retirer la nappe facilement et en toute sécurité.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.