Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 3

Passo 3
Gently slide an opening pick between the antenna flex cable and the top of the speaker. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.
  • Gently slide an opening pick between the antenna flex cable and the top of the speaker.

  • This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.

Desliza la púa de apertura cuidadosamente entre el cable flexible de antena y la parte superior del altavoz.

Esta porción del cable flexible está ligeramente adherido en su lugar. Si es necesario, aplica un poco de calor de l iOpener o secador de pelo para ablandar el adhesivo. Esto hará que sea más fácil separar el cable flexible de forma segura.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.