Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Use the flat end of a spudger to gently lift the battery connector end of the logic board up. Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.
Remove the logic board
  • Use the flat end of a spudger to gently lift the battery connector end of the logic board up.

  • Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.

スパッジャーの平面側先端を使って、ロジックボードからバッテリコネクタの先端を持ち上げます。

ケーブル側に引っ張らないようご注意ください。作業中抵抗を感じたら、全てのケーブル、コネクタとコンポーネントがボードから外れているか確認してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.